Thursday
Jun022011
Rubber Molding
Micro-Tronics is a custom fabricator of cloth-reinforced diaphrams, solid rubber, and rubber-to-metal bonded seals. We also make a variety of gaskets, inserts, Kapton seals, o-rings, and grommets.
- Compounds
- Silicone (Low, and High Temperature)
- Fluorosilicone
- Fluorocarbon (Viton ®)
- Neoprene
- Buna N
- EPDM
- Processes
- Diaphragms (rubber impregnated fabric)
- Solid Rubber & O-rings
- Rubber to Metal
- Die Cutting
- Post-cure
- Diaphragms (rubber impregnated fabrics)
- Silicone (Low Temp, & High Temp)
- Max Part Size: Ø10”x 8”
- Depth to Width: 1:1
- Multi-cavity Molds: 20”x 20”x 8”, (9 cavity)
- Thickness Range: .010 - .030; Tolerance: ±.005
- Die Cut Hole Tolerance: ±.005
- Fluorosilicone
- Max Part Size: Ø8.0”x 6”
- Depth to Width: 1:1
- Multi-cavity Molds: 10”x 10”x 8”, (4 cavity)
- Thickness Range: .010 - .030; Tolerance: ±.005
- Die Cut Hole Tolerance: ±.005
- Fluorocarbon (Viton ®)
- Max Part Size: Ø3.0”x 6”
- Depth to Width: 1:4
- Multi-cavity Molds: 12”x 12”x 6”, (9 cavity)
- Thickness Range: .017 - .025; Tolerance: ±.005
- Die Cut Hole Tolerance: ±.005
- Solid Rubber Shapes & O-rings
- Max Part Size: 10”x 10”x 8”; O-ring: Ø18”
- Tolerances:
- Ø6.0” platens: ±.002
- Shapes: ±.005
- O-ring X-section: ±.002 (up to 3” O-ring)
- Rubber to Metal
- Silicone, Fluorosilicone, Fluorocarbon (Viton ®)
- Max Part Size: 14”x 14”x 12”
- Max Plate Seal: Ø18”
- Multi-cavity Molds: 20”x 20”x 12”, (16 cavity)
- Tolerance: ±.005, (rubber to metal gaskets: ±.010)
- Neoprene
- Max Part Size: 14”x 14”x 12”
- Max Base Assembly: Ø14”x 12”
- Multi-cavity Molds: 20”x 20”x 6”
- Tolerance: ±.003
- EPDM
- Max Part Size: 4”x 5”
- Multi-cavity Molds: 20”x 20”x 6”, (4 cavity)
- Tolerance: ±.010 thickness
- Die Cutting
- Max Part Size: 16”x 6” x ¼” thick
- Max Gasket: 5”x 5”
- Tolerance: ±.010 (holes)
- Post-cure Oven
- Max Part Size: 40”x 20”x 1”
- Max Temperature: 550º F
- Silicone, Fluorosilicone, Fluorocarbon (Viton ®)
- Silicone (Low Temp, & High Temp)
Facilities Tour