Tuesday
Jun072011
Assemblies
Micro-Tronics can provide its customers with assembly and subassembly components. Assembly methods practiced are riveting, swaging, and other standard methods.
Thursday
Jun022011
EDM / CNC EDM
Micro-Tronics specializes in both conventional and CNC EDM. MTI can accommodate the following:
- Max Part Size: 43”x 29”x 19” (Work Envelope: 17.7”x 13.7”x 13.7”)
- Max Work Envelope: 19.4”x 13.7”x 13.7” (Part Size: 37”x 28”x 16”)
- Threading: 5-40 and larger
- Tolerance: ±.0002
Thursday
Jun022011
Wire EDM
- 5-Axis Capability
- Wire Size: .004” to .014”
- Max Part Size: 42”x 33”x 17.75” (Work Envelope: 19.69”x 13.79”x 17.75”)
- Tolerance: ±.0001 Surface Roughness: 4 in steel up to 1.00 thick
- Tolerance: ±.0002 Surface Roughness: 36 in alum up to 1.00 thick
Thursday
Jun022011
Fast Hole EDM
Fast Hole EDM offers many benefits over conventional drilling. This process allows for drilling to be done on curved, spherical, or angled surfaces. Fast Hole EDM is also used to drill materials that are too hard to be drilled with conventional methods. Another benefit offered by this process is the ablility to drill deep, straight holes that cannot be obtained by other drilling methods. The last major benefit to Fast Hole EDM is the finish quality: parts that have been drilled with this method do not have burrs, therefore eliminating secondary processes.
Thursday
Jun022011
Waterjet
Compatible materials for waterjet cutting include, but are not limited to: wood, steel, titanium, aluminum, copper, brass, marble, ceramic, glass, stone, and laminates.
- Work Envelope: 55”x 100”x 9”
- Tolerance: ±.010 up to 1.0” thick
Thursday
Jun022011
Laser Cutting
Compatible materials for laser cutting include: 3/8” Armor Plate, 3/8” Steel, 1/8” Alum., 2” Wood, 1” Acrylic, 3/16” Stainless Steel
- Work Envelope: 96”x 48”
- Tolerance: ±.005
Thursday
Jun022011
Laser Marking
While most forms of engraving result in a loss of some of the marked material when it is etched away, laser marking results in essentially no loss of material. Instead, the laser is used to create a shift in the color of the material, creating a visible, virtually indestructible mark with minimal impact to the item. MTI can mark materials such as steel, stainless steel, aluminum, brass, copper, magnesium, plastic, and more.
Thursday
Jun022011
CNC Lathe
- CNC Machines
- Max Part Size: Ø10”x 4.0” (Work Envelope: Ø10”x 4.0”)
- Tolerance: ±.0003
- Surface Roughness: 32
- Live-Tooling Machines
- Max Part Size: Ø2.5” up to 36” long through spindle
- Max Part Size: Ø10”x 10” long in 8” dia. chuck
- Could get 10” dia. chuck to hold up to Ø12” stock
- Min Hole: Ø.015
- Tolerance: ±.0003
- Surface Roughness: 32 or better based on material
Thursday
Jun022011
CNC Milling
MTI has both horizontal and vertical milling capabilities.
- Materials: Aluminum, Cobalt, Copper, Inconel, Nickel, Steel, Stainless Steel, Titanium, etc.
- 3-Axis
- Max Part Size: 18”x 36”x 10 (Work Envelope: 18”x 36”x 10”)
- Min Hole to Depth:
- Ø.008 x .090” Tolerance: ±.00025 Surface: 32
- Ø.062 x .125” Tolerance: ±.00025 Surface: 32
- Ø.125 x 6.00” Tolerance: ±.0001 Surface: 32
- Tolerance: ±.0001
- Surface Roughness: 32
Thursday
Jun022011
Rubber Molding
Micro-Tronics is a custom fabricator of cloth-reinforced diaphrams, solid rubber, and rubber-to-metal bonded seals. We also make a variety of gaskets, assemblies, inserts, Kapton seals, o-rings, and grommets.
Thursday
Jun022011
Quality
Our customers benefit from the depth of our employee's experience. We have satisfied customers not only in the United States, but also globally. We are certified to ISO9001:2008 & AS9100 REV B by QMI as well as NADCAP Certified for E.D.M. process (Sinker, Fast Hole, and Wire E.D.M.) by PRI. In addition to being compliant to ITAR we are also certified by the FAA and the Department of Transportation for the Anti-drug and Alcohol Misuse Prevention Program (AAMPP).